IG 335

Stáhnout technický list

TWO COMPONENT 3D NANO POLYMER

EXTREMEL HYDROPHOBIC AND OLEOPHOBIC PROTECTION OF MINERA SURFACES AGAINST WATER, GREASES, CHEMICALS AND POLLUTION

EXCELLENT ANTI GRAFFITI PROTECTION

Resistant to wear and tear

IS BASED ON FLUOR POLYURETAN NANO POLYMERS

APPLIED TO: pavements, patios, bus stops, pedestrian zones, boardwalk and parking places.

IG 335 is a transparent, extremely durable, and long lasting double protection. It creates a highly resistant surface against water, oil (motor, food) and is to be applied to extremely contaminated surfaces. Protects against weather factors and UV rays, and is resistant to wear, abrasion, corrosion, and marine environment. This protection slows down the aging process.

IG 335 provides a longer and better protection to both horizontal and vertical surfaces. Reduces the adhesion from adhesives such as stickers, posters or chewing gum. Is suitable for most indoor and outdoor areas such as pedestrian zones, floors, industrial floors, stairs and more.

• Hydrophobic and oleophobic pearl protection.
• Protects against wear and abra
• The hydrophobic properties of the treated surface do not change with the aging process of the surface.
• Protects against UV radiation, yellowing, bleaching, weather factors, acidic rain, de-icing salt, and other.
• The surface becomes is non-sticky for chewing gum, posters, etc.
• Creates a rapid polymerization of the surface.
• Allows the surface to breathe

    Protection against water, oil, dirt and wear

Product is ideal for wall and floor (parking, terraces, pedestrian zones, sidewalks, waiting rooms, stairways, lobby and etc.). It recommended for the following materials: bricks and unglazed tiles, terracotta, plaster, stone (slate, limestone, granite, sandstone, marble, basalt, etc.), concrete, unglazed ceramics, etc. The combination of water, grease and dirt on the facades of undesirable, but IG 335 will have creates an unrivalled protection. It creates an excellent hydrophobic, oleophobic, wear-resistant, and non-stick surface, which also allows the surface to breathe. Significantly extends the lifeline of surfaces and thus saves you money.

    Sights

Is a durable product for the protection and maintenance of monuments and achieves an excellent protection against wear. This significantly reduces maintenance costs from damage or destruction. Ideal for statues, fountains, walls, bridges, floors and highly loaded surfaces monuments (castles, churches, chapels, marble gravestones, museums and so on.)

•      The product is ready to mix components A and B, then, ready for use. Do not dilute the product!
•        Mixing ratio - by volume - 4: 1 component A / B
•        Pour component B into a jar containing component A. Mix products homogenously manually or with a robot. Do not mix quickly and forcefully, mustn’t foam.
•        The applied surface must be dry, dust-free, and degreased with IG 230, or IMPASOL HCA RAPID. The surface temperature mustn’t be lower than 10 ° C and have a 10% maximum humidity.
•      Manual application: brush or roller, mustn’t contain bubbles.
•      Spray application: a low-pressure spraying, moderated Airless
•      Apply 2 layers across each other, wet on wet, let dry for 3 hours
•      Applied 2 layers, the second layer is to be applied immediately after the removal of the solvent from the first layer before its polymerization!
•      Is dry (from polymerised) film after 24h at 20 ° C / 50rh
•      Cleaning: depending on the surface structure using IG 230 and IG 250, leave to act and then rinse with high-pressure equipment.
•     Given the wide range of surfaces a prior test application is recommended
•     VOC - IMPAGUARD 335 -  Categories A in accordance to 415/2012 Sb., subcategories H s limited VOC 750g/l, contains VOC when ready IG 335 is 628g/L.