Stáhnout technický listStáhnout datový list
IG 336 SI is a transparent, highly loadable, and long-firming hydrophobic protection, which is high water resistant and UV light. This highly efficient protection is suitable for all extremely stressed surfaces such as concrete paving, concrete floors, pavements, patios, and tiles. IG 336 SI creates a 3D (three-dimensional) structure, which reinforces the surface structure, but doesn’t reduce its breathability. The treated surface prevents the formation of white sediments and protects it against weather factors and solar radiation (UV) radiation. This protection slows down the aging process.
IG 336 SI provides a highly effective and durable protection to both horizontal and vertical surfaces. Their subsequent maintenance is cheaper and easier.
Specially made for automatic and semi-automatic machine application in the production of concrete building blocks and tiles. Sprayable simply and safely during production and can be immediately storable.
IG 336
Firming and hydrophobic coating of IG 336 SI doesn’t alter the structures surface and preserves its permeability and breathability. It is suitable for sculptures, plastered statues, frescoes, facades, stone construction. In comparison with methyl silicone firming products, IG 336 SI creates a great UV radiation resistant film and does not contain solvents.
It is also suitable for the renovation of concrete or clay (unglazed) tiles, concrete, terrazzo, facing bricks, ceramic or concrete lining tape, mineral plasters and facades. IG 336 SI is can be applied to old and new surfaces. Hydrophobic effect film also prevents the penetration of moisture into the treated surface, and protects it from further damage and pollution.
Average consumption per layer, which is relevant to the porosity of:
Base |
Appearance |
PH |
Color |
Coverage |
Protects against |
Aqua |
fluid |
13 |
Colorless |
8-12m2/L |
UV, water and dirt |
Aplication
The product is ready for application, just shake before using. We recommend removing loose dirt from the surface, which will significantly reduce consumption.
The product is to be applied on a perfectly clean (degrease the surface with IMPAGUARD 230 or 250), dust-free, and dry surface. Should not be applied to any surface that contains traces of silicone!
The product is to be applied to the surface by spraying (low or medium pressure spraying) from the bottom up with one or two layers. The interval between each applied layer is of 30minutes.
In order to achieve the full effect of the hydrophobic protection, you must wait 7 days.
Instruments, which were used for the application of the product, must be cleaned immediately with IMPAGUARD 230 or 250. Applied surface is dry after 24h at 20 ° C / 50rh.
Do not apply in cold and freezing temperatures (<5°C), windy weather, hot sun or exposed surfaces.
Given the wide range of surfaces to which it can be applied, it is recommended test it on a smaller surface.e Please note: Contains silicates: Protect glass, frames, metal and painted surfaces, vehicles, etc.
Packing: 20, 4x20, 200 a 1000L IBC