IG 113 ANTIGRAFFITI GEL

Stáhnout technický list

EXTREMLY STRONG GEL REMOVER  OF GRAFFITI AND TAGS

ANTIGRAFFITI IG 113 is created for an extra heavy cleaning GEL procedure of tags, graffiti, old paints and varnishes. It is ideal to be applied on materials such as paints, facade stones, body cars, wood and plastic surfaces It is also ideal for a highly efficient and low-cost removal of two-component systems, thermosetting systems and even systems based on cellulosic, acrylics, vinyl, amino plastics, polyesters, phenolic, one and two-component epoxy resins, one and two-component polyurethane used in the industry. ANTIGRAFFITI IG 113 allows you to reduce the product consumption by up to 30% in comparison to conventional products.

It is designed to be applied on surfaces that have been previously treated with an anti-graffiti protection such as IG 110, IG 115, IG 335 and IG 665. Its effects can be stopped at any time during the cleaning procedure, thereby minimizing the risk of damaging the threated surface. Its selective cleaning removes graffiti without damaging the treated surface. If the graffiti is of the same character as the paint on which it was applied on, the selective removal isn’t possible.

It is always best to remove graffiti as soon as possible. Some ink contains slow evaporating solvents that can sink info the surface before the ink dries. If the removal is applied for too long, it can damage the foundation to a depth of color and structure. Thus, It is important to set an ideal time of application and to remove the product in time. Before use, you must ALWAYS PERFORM A TEST APPLICATON.

Application:

The product is ready for use. Before use, you must ALWAYS PERFORM A TEST APPLICATON. Apply the product in a circular manner on graffiti or tags. Wait until the graffiti or tag dissolves, then wipe with surface with a soft cloth or wash of with water. If necessary, repeat the procedure. Finally, wipe the treated surface with a soft cloth to dry.  If the surface was pre-treated with products IG 110 or IG 115, GRAFFITISOLVE IG 111 can remove one of these protective layers. These protective layers should be reapplied with IG 110 or IG 115. If the applied protection was made with IG 335 or IG 665, the reapplication after the removal of graffiti is not necessary. Suggested method of application: roller, brush with natural fibers or cloth. Packaging: 5, 20 and 6 x 20L