IG 310

Stáhnout technický list

STRONG AND FAST CLEANER

CLEANER, DETERGENT AND REMOVER OF

CALCIUM AND MINERAL, SALT, SALTPETRE OR FATTY DEPOSITS,

TRAFIC POLLUTION, ATMOSPHERIC DIRT, SOUR GREASES, AND "EXTRA” RESISTANT DIRT

USE ON DIRTY FLOORS, STONE, GRANTE OR LIMESTONE.

RESTORE OXIDIZED SURFACES

IS NOT ABRASIVE AND EASY TO APPLY

IG 310 is designed to remove contaminants from bricks, ceramic tiles, mosaic tiles, stoneware, granite and other hard acid-resistant materials. In other words, all surfaces where the materials hard silicates cannot be removed by conventional means. The product can also be used for removing stains of rust, dirt, stone, bricks, cement, paint, etc. It also cleans aluminium (outside anodic passivized, where there is a risk of removing of passivized protective layer) - dissolved the aluminium salts and exposes the original metal surface, or removes rust stains. The product is effective even without rubbing the substrate and the results are immediately visible. There are no risks of damaging the treated substrate by abrasion or erosion. In a single act, it quickly removes, cleans and renovates the surface. Removes darkening surface and cleans deeply.

IG 310 provides a highly efficient cleaner that removes biological contaminants, oxidation, smog, mineral and calcium salt deposits, dirt adhering (algae, cyanobacteria, moss, insects, etc.), acidic grease, etc.

After application IG 310, we recommended to protect the surfaces with IG 223, 225, 227 and 335. These products create an ultra-thin hydrophobic and oleophobic layer, which protects the surface against subsequent contamination, reduces the subsequent sedimentation of mineral and limescale.

IG 310 It is designed for manual, low and high-pressure washing. ALWAYS apply from the bottom up!!!  IG 310 replaces mechanical treatment such as needled, sandblasting, dry ice blasting, grinding, and washing abrasive cleaners that damage the surface.

When IG 310 is insufficient, we recommend the application of IG 380 gel.

Washing and removal of paving and tiling

IG 310 is ideal for cleaning surfaces such as ceramic, glazed and concrete surfaces. Degreases, removes dirt and water coatings (mineral, calcium, iron sediments or compounds such algae, cyanobacteria, "water laitance"). Highly efficiently washes dirt in pools and wellness spas. Is to be used in aqua parks, spas, swimming pools, hotels, and cuisine. It is ideal for walls, trim, railings, stairs, entrance halls and floors. After application and rinsing, we recommend the use of IG 223, 224, 227, 335, etc.

Cleaning and removal of dirt from the facade and building surfaces

IG 310 easily and quickly cleans and regenerates mineral, silicate, silicone, acrylic and concrete facades and plasters. Removes salt ("saltpetre"), calcium, iron sediment, algae, cyanobacteria, oxidation and "transport the dirt." After washing and rinsing, we recommended to protect the surface with IG 227, 335, such as anti-graffiti protection IG 110 or 115^th

Sights

Is an ideal product for cleaning and maintenance of monuments, because it is based on safe ingredient, It contains hydrochloric acid, nitric acid, and formic acid. The maintenance heritage sights are very expensive and by using using IG 310, it will reduce the costs. Is ideal for statues, fountains, walls, floors, and highly loaded surfaces monuments (castles, churches, chapels, marble tombstones, fountains, fountains, drinking fountains, museums and etc.).

    Application

Before application, remove loose dirt from the surface, which reduces the consummation. To remove saltpetre, use the product in the undiluted form. For other applications dilute 1: 5 with fresh water. Dilution of the product is dependent on the thickness and the number of layers to be removed. Always moisten the surface prior to application and apply from the bottom up! Duration the application must be determined individually and must be tested beforehand on a small area. The particular application should be selected based on the process results of the preliminary test. Manufacturer (importer) assumes no responsibility for any damage caused by improper use of the product.

Methods of application: brush, roller, and spray. Apply evenly and integrity to the surface. Let 10-30 minutes rest, we can use a brush or scrubbing brush, thereby dramatically improve the product efficiency. After cleaning, rinse thoroughly with clean water, preferably with high-pressure water and let dry. When rinsed product leaves no traces. If necessary, repeat this procedure.

Packaging: 5, 20, 6x20 and 220Kg

Technical chart