SPECIAL HYDROPHOBIC PROTECTION OF MINERAL ABSORPTIVE SURFACES ALSO ON FLAT ROOF, PAVING, PLATFORMS, BALCONY, CAR PARKS AND PEDESTRIAN ZONES
IG 223 is transparent, penetrating, rating protection of absorptive surfaces. Thanks to its small molecular structure it creates water absorbability protection. It protects against UV radiation, dirt and excessive humidity. It transmits water vapour, but it is water resistant. By virtue of reduced water absorption, it decreases cracking and surface pealing (in freezing or snow-melting conditions). This leads to longer service life of the surface. It avoids moss, algae and mould spreading.
IG 223 can be used on walls or floors. It is recommended for: bricks, crock tiles, terracotta, concrete, plastering, stones (slate, lime stone, granite, sandstone, marble, basalt, etc.), unglazed ceramics and etc. IG 223 offers an effective, highly resistant protection not only on horizontal but also on vertical surfaces. Their further maintenance is markedly cheaper and easier. IG 223 creates invisible film without any change to original surface.
IG 223 was tested on water absorbing power on alkaline (decreasing absorbability by 76 – 86%, depending on material) and also on neutral (decreasing absorbability by 90 – 98%, according to material) surfaces at 24 hours test. Even after 72 hours, the absorbing power was decreased by 78% on concrete tiles. The absorbing power test on ceramic tiles – 24 hours, 5 and 7 days with the result 96%, 93% and 92%. The test is performing by immersion into saline and acid fluid.
Building surfaces (such us mineral, silicate, silicon, concrete, ceramics) are very expensive nowadays. Their service life is adequate to its maintenance, which is as costly as its construction. Usage on neutral and alkaline mineral surfaces such us bricks, sandstone, concrete and plastering. IG 223 creates hydrophobic effect with the absorbing water inhibition. IG 223 offers easy and reasonably priced protection, which fulfil all requirements for a good and quality protection. Ideal for car parks, terraces, pedestrian zones, pavements, waiting rooms, stairs, entrance halls, etc.
The surface is protected from water, dirt, impurities. IG 223 offers easy and reasonably priced protection, which fulfil all requirements for a good and quality protection.
No. of layers
|IG 223 1-2||until saturation 48 hours||48 hours, final at 7dní||Solvent||Pure||R 10, 65, 66|
|Colour||Spreading rate||Protection and separation against
|39°C||clear||6-12 m2 / L||Water, oil, fat, impurities, moss, algae, mould|
Aplication IG 223